Hubs

Smooth-rolling performance and 11-speed compatibility define Shimano's 105 rear hub. Shimano's trademark angular contact bearings ensure that your wheels roll as smooth as silk. This hub includes a Shimano quick-release.

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm

Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

- Boost developed straightpull hub with unique oversized flanges - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x148 Boost, SLS straight pull - WEIGHT (g): ±282 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano / Steel XD - ADAPTERS INCL. (mm): N/A - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos

- Trail riding optimized straightpull hub with unique oversized flanges, - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x142mm, SLS straight pull - WEIGHT (g): ±281 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano Standard / Steel XD - ADAPTERS INCL. (mm): QRx135mm, 12x142 - ADAPTERS AVAIL. (mm): QRx135mm, 10x135mm, 12x135mm, 12x142mm - FINISH: Polish anodized, laser logos

SPANK's new OOZY Trail Hubs are a huge step forward in straight pull hub design and manufacturing. The OOZY Trail Hub has unique oversized straight pull flanges, and a 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing, offering added spoke strength, wheelset stiffness, and spoke torque retention never before seen in straight pull designs. The SSL (single spoke length) flanges offer ultimate ease and convenience of maintenance. SPANK's end cap system is compatible with SPIKE hubs, and makes conversion between 135 and 142mm rear spacing simple — in QR, 10mm, or 12mm axle diameters. 30T engagement and tried and true 3 pawl system deliver a good blend of quick pick up and trustworthy durability. Like the benefits and techie look of straight pull hubs but not the 28H drawback of traditional designs? Then OOZY Trail Hubs are the answer.

- 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Alloy Shimano Standard - Shimano Standard/Steel XD/Alloy XD drivers available - MATERIAL: CNC optimized, alloy hub body, steel axle and freehub body - CONFIGURATION (mm): 12x148mm, J-hook - WEIGHT (g): ±316 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy Shimano Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy XD Standard / Steel XD - ADAPTERS INCL. (mm): 12x148 - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos

- 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized, alloy hub body, steel axle and freehub body - CONFIGURATION (mm): 12x148mm, J-hook - WEIGHT (g): ±316 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy Shimano Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy XD Standard / Steel XD - ADAPTERS INCL. (mm): 12x148 - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos

SPANK Industries' newest SPIKE Hubs are a step forward in the world of dependable, light weight, high performance hub design. Traditional 32 hole J-Hook type, oversized flanges, offer the utmost in wheel build strength and spoke torque retention, while maintaining a respectable overall weight. With a 3 pawl, 30T ratchet specification and oversized bearings, you get sharp engagement without compromise to durability or performance over time. Available in a range from 135mm to 157mm with configurations in between. Tested and recommended by some of the top racers, SPANK SPIKE Hubs offer the best of both worlds — World Cup performance and great value.

- Strength, durability and convenience similar to our DH Rear Hubs - Highly adaptable spacing, fitting most non-DH bikes - Adaptability between 135 and 142 configuration - Shimano Alloy Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, hardened steel axle and Alloy freehub body - CONFIGURATION (mm): 12x135, J-hook - WEIGHT (g): ±320 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Alloy Shimano Standard / Steel Shimano Standard / Steel XD - ADAPTERS INCL. (mm): 12x142, 12x135 - ADAPTERS AVAIL. (mm): QRx135 / 10x135 / 12x135 / 12x142 - FINISH: Polish anodized, laser logos

- Traditional 32 hole J-Hook Hub light weight, high performance - Offering sharp engagement without compromising durability - Adaptability between 150 and 157 configuration - Shimano Standard/Steel XD drivers available

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling

Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm

Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.

Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

Shimano XT FH-M8000/8010 Front Hubs - All-weather durability, reliable performance and lighter weight - Cone races ground by a Cubic Boron Nitride tool for smooth rolling durability - Center Lock disc brakes provide reliable braking power - Rotor lockring not included - Series: Deore XT - Disc Rotor Mount: Center Lock Disc - Axle Type: QR - Axle Length: 100mm - Axle Diameter: 14mm - Contact Sealing: Labyrinth and Contact - Spoke Holes: 32H - Center to Flange (Right): 41mm - Center to Flange (Left): 44mm

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28

- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g