Skip to main content

SE NorCal Series is in full effect. SF & Oakland: Sold Out! San Jose: 1, Stockton 1, Sac: 1 left. ALSO: Until March 31, save up to 40% on select Marin, Fuji and Breezer bikes. March 2024 hours: M-F 11-6, SAT 10-5. Questions? Text/call us at 510-328-1158 or e-mail us at laurelcyclery@gmail.com

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cables

$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$5.76
- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm
$8.00
- Aluminum guides for securing housing/tubing to frame cable stops or cable guides
$10.99 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$5.99
- Pre-stretched Teflon coated 19 strand inner wire - new packaging
$5.99
- Pre-stretched Teflon coated 19 strand inner wire
$5.99
- Pre-stretched Teflon coated 19 strand inner wire
$5.99
- Pre-stretched stainless 19-strand inner wire - Slick profile for smooth performance - New Packaging
$5.99
- Pre-stretched stainless 19 strand inner wire - Slick profile for smooth performance
$5.99
- Pre-stretched, stainless 19-strand inner wire - Slick profile for smooth performance - 2000mm length - Use: brake - Length: 2000mm - Diameter: 1.6mm - Front/rear set
$24.99
- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Prestretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included
$24.99
- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Pre-stretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible - Cable diameter: 1.5mm - Casing diameter: 5mm
$7.99
Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams
$24.99
Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.
$24.99
Our Box One Shift Cable & Housing Kit is the easiest way to get silky smooth and consistent shifts on any drivetrain. Replace your Box One, Box Two, Shimano and SRAM kit, or upgrade your Box Three or Box Four set-up. This kit is a combination of our best performing Cable Housing and Slick Coated Stainless Steel inner cable. In lab tests this combination has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Inner Cable 2100mm - Our Best Performing Housing - 4mm Housing 2000mm - Prepared with silicone grease - (2) 1.8mm Cable End Crimps - (3) 4mm Sealed Short Ferrules COMPATIBILITY - Works with 12, 11, 10, 9, and 8 speeds. - Weight: 84.3 grams
$11.49
- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: X-Long - Diameter: 1.5mm
$70.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
$24.99
380mm long, single-ended straddle for mountain cantilever brakes
$3.99
- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps
$3.99
- 1.1mm x 2100mm advanced die-drawn stainless steel cable is low friction with minimal elongation for consistently effortless shifting performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Recommended for 10-speed drivetrains - Compatible with all high-performance outer casing, lubricants, and end caps
Page 1 of 9 Next page