Skip to main content

SE NorCal Series is in full effect. SF & Oakland: Sold Out! San Jose: 1, Stockton 1, Sac: 1 left. ALSO: Until March 31, save up to 40% on select Marin, Fuji and Breezer bikes. March 2024 hours: M-F 11-6, SAT 10-5. Questions? Text/call us at 510-328-1158 or e-mail us at laurelcyclery@gmail.com

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Fenders

$6.95
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$57.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 26 x 1.6–2.1
$59.99 - $74.99
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.
$24.99 - $30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
$24.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.
$23.99
Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.
$19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$64.99 - $89.99
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
$64.99 - $74.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.
$54.99 - $74.99
Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$54.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$54.99 - $64.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$19.99
You only need a couple of seconds to protect yourself and your bike from wet weather. The Clip-On Fenders are made of a durable all-weather polymer so never again will you arrive at work with a rain streak up your back again. And because they're clip-ons, you can easily remove the fenders on sunny days.
$99.95 - $125.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$27.99
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
$21.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included
$82.99 - $83.99
These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA
$39.99
These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA
$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
$82.00
These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.
$89.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$82.00 - $89.00
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
$39.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)
Page 1 of 5 Next page